ASDSO Dam Safety Toolbox

Spillway Integrity Analysis: Difference between revisions

From ASDSO Dam Safety Toolbox
Jump to: navigation, search
(Created page with "<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed --> __NOTOC__ ---- {{Picture <!-- Add image file name (ex.image.jpg) --> |image=ASW1.jpg <!--Add link if applicable --> |link= <!-- Add picture caption --> |caption=This earth cut, vegetated spillway completely eroded through during a flood resulting in an uncontrolled release of the reservoir. }} <!-- Introductory paragraph or topic page summary --> Earth-cut auxiliary spillw...")
 
No edit summary
Line 12: Line 12:


<!-- Introductory paragraph or topic page summary -->
<!-- Introductory paragraph or topic page summary -->
Earth-cut auxiliary spillways are excavated through natural soil and/or rock materials, normally protected with vegetation. The Natural Resources Conservation Service (NRCS), formerly the Soil Conservation Service (SCS), assisted local sponsors in constructing more than 29,000 dams throughout the United States, most of which are equipped with an earth-cut auxiliary spillway. Many other dams outside of the NRCS purview have also been constructed with earth-cut spillways. Earth-cut auxiliary spillway geometry typically consists of a trapezoidal open channel with a subcritical inlet, a level crest or control section, and a supercritical exit. Most earth-cut auxiliary spillways were designed more than 50 years ago using general guidelines and engineering judgment without a rigorous analysis of their erodibility for the maximum design storm. Unfortunately, some designs underestimated the erodibility of the spillway. As more and more earth-cut auxiliary spillways are activated, some have performed as designed while others have sustained significant erosion, and several have completely breached.
Earth-cut auxiliary [[spillways]] are excavated through natural soil and/or rock materials, normally protected with vegetation. The Natural Resources Conservation Service (NRCS), formerly the Soil Conservation Service (SCS), assisted local sponsors in constructing more than 29,000 dams throughout the United States, most of which are equipped with an earth-cut auxiliary spillway. Many other dams outside of the NRCS purview have also been constructed with earth-cut spillways. Earth-cut auxiliary spillway geometry typically consists of a trapezoidal open channel with a subcritical inlet, a level crest or [[Control Section|control section]], and a supercritical exit. Most earth-cut [[Auxiliary Spillways|auxiliary spillways]] were designed more than 50 years ago using general guidelines and [[engineering]] judgment without a rigorous analysis of their erodibility for the maximum design storm. Unfortunately, some designs underestimated the erodibility of the spillway. As more and more earth-cut auxiliary spillways are activated, some have performed as designed while others have sustained significant erosion, and several have completely breached.


Recent advances in hydraulic modeling and spillway integrity analysis enable engineers to more effectively identify potential failure modes due to spillway outflows than was previously possible.  For example, two- and three-dimensional hydraulic models allow engineers to analyze complex flow patterns for a wide range of flow conditions based on existing or proposed terrain.  These analyses can be helpful in identifying areas of high velocity that may be more susceptible to erosion.  They can also help engineers assess the impact of downstream features such as road embankments.  Detailed hydraulic models can be used to ensure that outflows are directed away from the dam embankment and to estimate anticipated tailwater conditions, including eddies, at the dam during various flooding events.
Recent advances in hydraulic modeling and spillway integrity analysis enable engineers to more effectively identify potential failure modes due to spillway outflows than was previously possible.  For example, two- and [[Three-Dimensional Hydraulic Models|three-dimensional hydraulic models]] allow engineers to analyze complex flow patterns for a wide range of flow conditions based on existing or proposed terrain.  These analyses can be helpful in identifying areas of high velocity that may be more susceptible to erosion.  They can also help engineers assess the impact of downstream features such as road embankments.  Detailed hydraulic models can be used to ensure that outflows are directed away from the dam embankment and to estimate anticipated tailwater conditions, including eddies, at the dam during various flooding events.


In addition to these hydraulic models, it is important to understand the geology of spillway outflow channels.  Subsurface investigation and testing can be used to define the erodibility of spillway outfalls and also identify underlying geology that could lead to problematic outflow conditions.  The NRCS has developed SITES and WinDAM software that include the ability to analyze the integrity of geologic profiles through both earth/rock cut spillways and embankments.  These are powerful tools to estimate the magnitude of erosion that would occur during a flood and to identify spillways that may be susceptible to failure should the design flood occur.
In addition to these hydraulic models, it is important to understand the geology of spillway outflow channels.  Subsurface investigation and testing can be used to define the erodibility of spillway outfalls and also identify underlying geology that could lead to problematic outflow conditions.  The NRCS has developed SITES and WinDAM software that include the ability to analyze the integrity of geologic profiles through both earth/rock cut spillways and embankments.  These are powerful tools to estimate the magnitude of erosion that would occur during a flood and to identify spillways that may be susceptible to failure should the design flood occur.
Line 24: Line 24:


==Best Practices Resources==
==Best Practices Resources==
{{Document Icon}} [[Dams National Engineering Handbook: Chapter 50- Earth Spillway Design|Dams National Engineering Handbook: Chapter 50- Earth Spillway Design (Natural Resources Conservation Service)]]
{{Document Icon}} [[National Engineering Handbook: Chapter 50 - Earth Spillway Design | National Engineering Handbook: Chapter 50 - Earth Spillway Design (Natural Resources Conservation Service)]]
{{Document Icon}} [[Dams National Engineering Handbook: Chapter 51- Earth Spillway Erosion Model|National Engineering Handbook: Chapter 51- Earth Spillway Erosion Model (Natural Resources Conservation Service)]]
{{Document Icon}} [[National Engineering Handbook: Chapter 51 - Earth Spillway Erosion Model | National Engineering Handbook: Chapter 51 - Earth Spillway Erosion Model (Natural Resources Conservation Service)]]
{{Document Icon}} [[Technical Release 210-60: Earth Dams and Reservoirs|Technical Release 210-60: Earth Dams and Reservoirs (Natural Resources Conservation Service)]]
{{Document Icon}} [[Technical Release 210-60: Earth Dams and Reservoirs | Technical Release 210-60: Earth Dams and Reservoirs (Natural Resources Conservation Service)]]


==Trainings==
==Trainings==

Revision as of 20:00, 21 October 2022



This earth cut, vegetated spillway completely eroded through during a flood resulting in an uncontrolled release of the reservoir.

Earth-cut auxiliary spillways are excavated through natural soil and/or rock materials, normally protected with vegetation. The Natural Resources Conservation Service (NRCS), formerly the Soil Conservation Service (SCS), assisted local sponsors in constructing more than 29,000 dams throughout the United States, most of which are equipped with an earth-cut auxiliary spillway. Many other dams outside of the NRCS purview have also been constructed with earth-cut spillways. Earth-cut auxiliary spillway geometry typically consists of a trapezoidal open channel with a subcritical inlet, a level crest or control section, and a supercritical exit. Most earth-cut auxiliary spillways were designed more than 50 years ago using general guidelines and engineering judgment without a rigorous analysis of their erodibility for the maximum design storm. Unfortunately, some designs underestimated the erodibility of the spillway. As more and more earth-cut auxiliary spillways are activated, some have performed as designed while others have sustained significant erosion, and several have completely breached.

Recent advances in hydraulic modeling and spillway integrity analysis enable engineers to more effectively identify potential failure modes due to spillway outflows than was previously possible. For example, two- and three-dimensional hydraulic models allow engineers to analyze complex flow patterns for a wide range of flow conditions based on existing or proposed terrain. These analyses can be helpful in identifying areas of high velocity that may be more susceptible to erosion. They can also help engineers assess the impact of downstream features such as road embankments. Detailed hydraulic models can be used to ensure that outflows are directed away from the dam embankment and to estimate anticipated tailwater conditions, including eddies, at the dam during various flooding events.

In addition to these hydraulic models, it is important to understand the geology of spillway outflow channels. Subsurface investigation and testing can be used to define the erodibility of spillway outfalls and also identify underlying geology that could lead to problematic outflow conditions. The NRCS has developed SITES and WinDAM software that include the ability to analyze the integrity of geologic profiles through both earth/rock cut spillways and embankments. These are powerful tools to estimate the magnitude of erosion that would occur during a flood and to identify spillways that may be susceptible to failure should the design flood occur.

Examples

Learn about the spillway and embankment erosion incident that nearly resulted in the complete breach of Sugar Creek Watershed Dam No. L-44 (DamFailures.org)

Learn more about earth-cut, vegetated spillway design and integrity analysis (DamFailures.org)

Learn how spillway outflows can adversely impact the dam embankment and operation (DamFailures.org)

Best Practices Resources

National Engineering Handbook: Chapter 50 - Earth Spillway Design (Natural Resources Conservation Service)

National Engineering Handbook: Chapter 51 - Earth Spillway Erosion Model (Natural Resources Conservation Service)

Technical Release 210-60: Earth Dams and Reservoirs (Natural Resources Conservation Service)

Trainings

On-Demand Webinar: Introduction to Earth Spillway Design and Evaluation

On-Demand Webinar: Guidelines for Assigning Erodibility Parameters to Soil Horizons for SITES Analyses

On-Demand Webinar: Introduction to Armoring Embankment Dams and Earth-Cut Spillways with ACBs


Citations:



Revision ID: 4009
Revision Date: 10/21/2022