PVC in Small, Low-Hazard Dam: Difference between revisions
From ASDSO Dam Safety Toolbox
(Created page with "<div style= "text-align:center;">''Message: Iron pipes with downstream valves are often in surprisingly good condition...but not always.''</div> ----</br> PVC pipe is not as commonly used due to concerns with lack of watertightness and other inherent disadvantages. The major disadvantage with PVC pipe is the bell and spigot joint connections. This type of joint connection has the potential for leakage or can separate as the embankment dam settles. The bell and spigot jo...") |
No edit summary |
||
Line 1: | Line 1: | ||
<div style= "text-align:center;">''Message: | <div style= "text-align:center;">''Message: PVC is not used for slip lining, although it can be used as a replacement outlet, generally for low hazard, small dams.''</div> | ||
----</br> | ----</br> | ||
Revision as of 16:35, 24 June 2022
Message: PVC is not used for slip lining, although it can be used as a replacement outlet, generally for low hazard, small dams.
PVC pipe is not as commonly used due to concerns with lack of watertightness and other inherent disadvantages. The major disadvantage with PVC pipe is the bell and spigot joint connections. This type of joint connection has the potential for leakage or can separate as the embankment dam settles. The bell and spigot joint integrity must be tested for leaks to ensure that the gasket has not rolled off during installation. Use of PVC bell and spigot joints should only be considered for nonpressurized, low hazard dam applications. PVC is typically available in sizes up to 48 inches in diameter.
Revision ID: 1419
Revision Date: 06/24/2022