O&M of Gates/Bulkheads: Difference between revisions
From ASDSO Dam Safety Toolbox
Rmanwaring (talk | contribs) No edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 10: | Line 10: | ||
<noautolinks>==Best Practices Resources==</noautolinks> | <noautolinks>==Best Practices Resources==</noautolinks> | ||
{{Document Icon}} [[Design Standards No. 6: Hydraulic and Mechanical Equipment (Ch. 6: Bulkhead Gates and Stoplogs) | Design Standards No. 6: Hydraulic and Mechanical Equipment (Ch. 6: Bulkhead Gates and Stoplogs), USBR | {{Document Icon}} [[Design Standards No. 6: Hydraulic and Mechanical Equipment (Ch. 6: Bulkhead Gates and Stoplogs) | Design Standards No. 6: Hydraulic and Mechanical Equipment (Ch. 6: Bulkhead Gates and Stoplogs), USBR]] | ||
<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below--> | <!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below--> | ||
Latest revision as of 16:48, 11 July 2023
“Steel-on-steel bearings require lubrication at regular intervals. Lubricants that contain rust-inhibiting compounds are desirable. Lubrication should be considered for some maintenance-free bearings because friction is reduced, the lubrication acts as a seal to prevent dirt from entering the bearing, and corrosion protection is increased. Certain types of lubricants are detrimental to some maintenance-free bearings and other types of maintenance-free bearings should not be lubricated at all”.[1]
Examples
Best Practices Resources
Citations:
Revision ID: 7087
Revision Date: 07/11/2023