ASDSO Dam Safety Toolbox

Regression

From ASDSO Dam Safety Toolbox
Revision as of 23:46, 8 September 2022 by Rmanwaring (talk | contribs) (Created page with "__NOTOC__ ---- <!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed --> “In some areas, special studies have been conducted to develop multiple regression equations to predict water yield from precipitation and watershed characteristics... The equations from these studies, however, are location specific and should not be used in any other areas. Local experts should be consulted for information on the existence and applicabilit...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

“In some areas, special studies have been conducted to develop multiple regression equations to predict water yield from precipitation and watershed characteristics... The equations from these studies, however, are location specific and should not be used in any other areas. Local experts should be consulted for information on the existence and applicability of regional equations”.[1]

“The most important variable in the regression equations is precipitation; therefore, the key to using this method is to have a good estimate of watershed average precipitation for the time period of interest”.[1]

Examples

Best Practices Resources

National Engineering Handbook 210 Part 630 Hydrology: Chapter 20 Watershed Yield

Trainings


Citations:

  1. ↑ 1.0 1.1 National Engineering Handbook 210 Part 630 Hydrology: Chapter 20 Watershed Yield, NRCS, 2009


Revision ID: 2622
Revision Date: 09/08/2022

Retrieved from "https://damtoolbox.org/index.php?title=Regression&oldid=2622"