Global Stability of a Dam
|
| Learn more about the need to consider uplift pressure when designing a gravity structure at DamFailures.org |
"Design and evaluation of hydraulic structures requires and understanding of the interaction between the flow and the components of the structure. The non-hydrostatic forces generated by the flowing water are of particular interest. Historically, physical models have been the primary means for predicting hydrodynamic forces on hydraulic structures. Laboratory studies of hydraulic loadings require relatively large-scale physical models which are expensive to construct, instrument, and operate. The hydraulic evaluation costs can be decreased if computational methods are used in lieu of such physical models studies. Numerical models capable of calculating hydraulic loads on bridge piers, lock guard walls, culvert valves, tainter valves, floodwalls, and moored ships will result in more cost-effective structural, mechanical, and geotechnical designs."[1]
Required Data
Evaluation Criteria
Types of Analyses
Examples
Learn more about the need to consider uplift pressure (DamFailures.org)
Learn from the critical oversights that led to the failure of St. Francis Dam (DamFailures.org)
Best Practices Resources
Design Standards No. 13: Embankment Dams (Ch. 6 Bulkhead Gates and Stoplogs), USBR, 2018
Strength Design for Reinforced Concrete Hydraulic Structures (EM 1110-2-2104), USACE, 2016
Design Standards No. 13: Embankment Dams (Ch. 13: Seismic Analysis and Design), USBR, 2015
Design of Hydraulic Steel Structures (ETL 1110-2-584), USACE, 2014
Design Standards No. 13: Embankment Dams (Ch. 9 Static Deformation Analysis), USBR, 2011
Design Standards No. 13: Embankment Dams (Ch. 4 Static Stability Analysis), USBR, 2011
Calculating Forces on Components of Hydraulic Structures (ERDC/CHL CHETN-IX-21), USACE, 2009
Earthquake Design and Evaluation of Concrete Hydraulic Structures (EM 1110-2-6053), USACE, 2007
Stability Analysis of Concrete Structures (EM 1110-2-2100), USACE, 2005
Roller-Compacted Concrete (EM 1110-2-2006), USACE, 2000
Gravity Dam Design (EM 1110-2-2200), USACE, 1995
Arch Dam Design (EM 1110-2-2201), USACE, 1994
Lock Gates and Operating Equipment (EM 1110-2-2703), USACE, 1994
Design of Small Dams, USBR, 1987
Trainings
On-Demand Webinar: Rehabilitation of Concrete Dams
On-Demand Webinar: Stability Evaluations of Concrete Dams
On-Demand Webinar: Analysis of Concrete Arch Dams
On-Demand Webinar: Introduction to Concrete Gravity Dams
Citations:
Revision ID: 4300
Revision Date: 11/18/2022