ASDSO Dam Safety Toolbox

Rubber Dams

From ASDSO Dam Safety Toolbox
Revision as of 01:00, 16 September 2022 by Grichards (talk | contribs)
Jump to: navigation, search

An example of an inflatable rubber dam. (Wikipedia)

Rubber dams are inflatable, cylindrical dams placed across channels that act as a weir or dam to raise the upstream water level when the structure is inflated. They are typically made of a rubberized fabric membrane. Stainless steel mesh or ceramic chips can be embedded in the membrane to hinder vandalism. They can be filled with water, air, or both. Rubber dams are normally used to temporarily increase storage at existing dams, divert water for irrigation, provide flood control, or provide a reservoir for recreation.

Best Practices Resources

Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 10- Other Dams, Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 10- Other Dams (Federal Energy Regulatory Commission, 1997)


Revision ID: 3287
Revision Date: 09/16/2022