Sloping Gate Example 1: Difference between revisions
From ASDSO Dam Safety Toolbox
No edit summary Tag: Reverted |
No edit summary Tag: Manual revert |
||
| Line 6: | Line 6: | ||
When [[rehabilitation]] was deemed necessary due to poor condition of the outlet conduit, the [[owner]] of this remote [[Montana]] dam decided to replace their existing inclined slide gate with an in-tower gate system. His experience with inclined gates was that they are challenging to operate and susceptible to clogging and damage. Not a good fit for a remote high elevation dam. | When [[rehabilitation]] was deemed necessary due to poor condition of the outlet conduit, the [[owner]] of this remote [[Montana]] dam decided to replace their existing inclined slide gate with an in-tower gate system. His experience with inclined gates was that they are challenging to operate and susceptible to clogging and damage. Not a good fit for a remote high elevation dam. | ||
<gallery mode=" | <gallery mode="slideshow" > | ||
<!-- Add image files here --> | <!-- Add image files here --> | ||
File:1SeE1.jpg | File:1SeE1.jpg | ||
Latest revision as of 22:11, 25 April 2023
Message: Inclined gates tend to have operational problems, may not be the best configuration for remote dams.
When rehabilitation was deemed necessary due to poor condition of the outlet conduit, the owner of this remote Montana dam decided to replace their existing inclined slide gate with an in-tower gate system. His experience with inclined gates was that they are challenging to operate and susceptible to clogging and damage. Not a good fit for a remote high elevation dam.
Note: The content on this page was originally created as part of DamOutletWorks.org (DOWL, 2018). It has subsequently been updated and reformatted as part of the Dam Safety Toolbox.
Revision ID: 6782
Revision Date: 04/25/2023