ASDSO Dam Safety Toolbox

Global Stability of a Dam: Difference between revisions

From ASDSO Dam Safety Toolbox
Jump to: navigation, search
No edit summary
No edit summary
Line 12: Line 12:


When a dam impounds a body of water, it will experience a load or force commonly referred to as hydrostatic pressure. A variety of other forces such as uplift pressure, earth pressure, silt pressure, wave pressure, wind pressure, ice pressure, [[seismic]] acceleration, hydrodynamic pressure, and thermal stress from ambient temperature changes can also act on the dam depending upon site conditions. Global [[stability]] refers to the ability of the dam to withstand all design [[Loading Conditions|loading conditions]] with adequate safety margin. This is a function of the geometry and material properties of the dam as well as the magnitude and combination of loads acting on the structure.
When a dam impounds a body of water, it will experience a load or force commonly referred to as hydrostatic pressure. A variety of other forces such as uplift pressure, earth pressure, silt pressure, wave pressure, wind pressure, ice pressure, [[seismic]] acceleration, hydrodynamic pressure, and thermal stress from ambient temperature changes can also act on the dam depending upon site conditions. Global [[stability]] refers to the ability of the dam to withstand all design [[Loading Conditions|loading conditions]] with adequate safety margin. This is a function of the geometry and material properties of the dam as well as the magnitude and combination of loads acting on the structure.
While this is imperative for gravity-type dams, global stability must also be demonstrated for appurtenances that impound water. For example, labyrinth spillway weir walls which impound the upper-most portion of a reservoir must be stable under normal and flood loadings. Failure of such a structure would result in the uncontrolled release of a portion of the reservoir. Therefore, they should be designed to gravity dam standards to resist overturning/sliding. This may require supplemental restraint such as grouted anchors due to the relatively low mass of the structure to resist the driving forces imposed by the reservoir.


==Required Data==
==Required Data==

Revision as of 20:14, 17 March 2023


Learn more about the need to consider uplift pressure when designing a gravity structure at DamFailures.org


When a dam impounds a body of water, it will experience a load or force commonly referred to as hydrostatic pressure. A variety of other forces such as uplift pressure, earth pressure, silt pressure, wave pressure, wind pressure, ice pressure, seismic acceleration, hydrodynamic pressure, and thermal stress from ambient temperature changes can also act on the dam depending upon site conditions. Global stability refers to the ability of the dam to withstand all design loading conditions with adequate safety margin. This is a function of the geometry and material properties of the dam as well as the magnitude and combination of loads acting on the structure.

While this is imperative for gravity-type dams, global stability must also be demonstrated for appurtenances that impound water. For example, labyrinth spillway weir walls which impound the upper-most portion of a reservoir must be stable under normal and flood loadings. Failure of such a structure would result in the uncontrolled release of a portion of the reservoir. Therefore, they should be designed to gravity dam standards to resist overturning/sliding. This may require supplemental restraint such as grouted anchors due to the relatively low mass of the structure to resist the driving forces imposed by the reservoir.

Required Data

Evaluation Criteria

Types of Analyses

Examples

Learn more about the need to consider uplift pressure (DamFailures.org)

Learn from the critical oversights that led to the failure of St. Francis Dam (DamFailures.org)

Best Practices Resources

Design Standards No. 13: Embankment Dams (Ch. 13: Seismic Analysis and Design), USBR, 2015

Earthquake Design and Evaluation of Concrete Hydraulic Structures (EM 1110-2-6053), USACE, 2007

Stability Analysis of Concrete Structures (EM 1110-2-2100), USACE, 2005

Roller-Compacted Concrete (EM 1110-2-2006), USACE, 2000

Gravity Dam Design (EM 1110-2-2200), USACE, 1995

Arch Dam Design (EM 1110-2-2201), USACE, 1994

Sliding Stability for Concrete Structures (ETL 1110-2-256), USACE, 1981

Design of Small Dams, USBR, 1987

Trainings

On-Demand Webinar: Rehabilitation of Concrete Dams

On-Demand Webinar: Stability Evaluations of Concrete Dams

On-Demand Webinar: Analysis of Concrete Arch Dams

On-Demand Webinar: Introduction to Concrete Gravity Dams


Citations:



Revision ID: 6708
Revision Date: 03/17/2023