Coated CMP Example, Low-Hazard Dam: Difference between revisions
From ASDSO Dam Safety Toolbox
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Category:Rehab vs. Replacement Outlet Works]] | |||
---- | |||
''' ''Message: CMP conduits can be coated with PVC to prevent corrosion'' ''' | |||
This Fergus County, MT dam was rehabilitated following failure using a PVC coated CMP. Extra caution is advised when installing coated CMP, a tiny nick can start the process of corrosion. | This Fergus County, MT dam was rehabilitated following failure using a PVC coated CMP. Extra caution is advised when installing coated CMP, a tiny nick can start the process of corrosion. | ||
Latest revision as of 00:32, 2 December 2022
Message: CMP conduits can be coated with PVC to prevent corrosion
This Fergus County, MT dam was rehabilitated following failure using a PVC coated CMP. Extra caution is advised when installing coated CMP, a tiny nick can start the process of corrosion.
-
Outlet end of pipe
-
Outlet of new CMP
-
Inlet structure with coated CMP
Note: The content on this page was originally created as part of DamOutletWorks.org (DOWL, 2018). It has subsequently been updated and reformatted as part of the Dam Safety Toolbox.
Revision ID: 4711
Revision Date: 12/02/2022