CIPP Works well for Smaller Conduits: Difference between revisions
From ASDSO Dam Safety Toolbox
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Category:Rehab vs. Replacement Outlet Works]] | |||
---- | |||
''' ''Message: CIPP works well for smaller conduits in high fill dams.'' ''' | |||
This Montana Dam was successfully lined with 24-inch diameter CIPP. The dam is 43 feet high with 300 acre-feet storage. The project was successful because the dam was in close proximity to the CIPP manufacturing plant, which was important to reduce the chances of the liner curing en route to the project site. | This [[Montana]] Dam was successfully lined with 24-inch diameter CIPP. The dam is 43 feet high with 300 acre-feet storage. The project was successful because the dam was in close proximity to the CIPP manufacturing plant, which was important to reduce the chances of the liner curing en route to the project site. | ||
<gallery mode="slideshow"> | <gallery mode="slideshow"> | ||
Latest revision as of 00:29, 2 December 2022
Message: CIPP works well for smaller conduits in high fill dams.
This Montana Dam was successfully lined with 24-inch diameter CIPP. The dam is 43 feet high with 300 acre-feet storage. The project was successful because the dam was in close proximity to the CIPP manufacturing plant, which was important to reduce the chances of the liner curing en route to the project site.
-
Preparing CIPP liner
-
Inserting CIPP at upstream end.
-
CIPP at downstream end.
Note: The content on this page was originally created as part of DamOutletWorks.org (DOWL, 2018). It has subsequently been updated and reformatted as part of the Dam Safety Toolbox.
Revision ID: 4703
Revision Date: 12/02/2022