Inspect Full Length of Pipe: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Category:Existing Conditions Outlet Works]] | |||
<div style= "text-align:center;">''Message: Careful Inspection is required for CMP, even if the initial impression is good.''</div> | <div style= "text-align:center;">''Message: Careful Inspection is required for CMP, even if the initial impression is good.''</div> | ||
----</br> | ----</br> | ||
Revision as of 00:00, 2 December 2022
Upon initial inspection, a conduit may appear to be in decent condition with many years of service remaining. However, a simple observation at each end of a pipe will not provide enough information to determine the condition of a pipe. A camera inspection of the full length of a pipe will provide more detail and can often be done inexpensively with an action camera such as a GoPro.
Content Courtesy of USDA Decision Analysis Guide for Corrugated Metal Culvert Rehabilitation and Replacement Using Trenchless Technology
-
24-inch corrugated metal pipe
-
A casual observer would likely assume that this old culvert is fine, but the inspector should look closely to observe the pipe’s condition.
-
Looking into the outlet using strong light
-
Camera (with leg extensions) entering outfall.
-
Inside the culvert looking upstream using CCTV
-
Inside the culvert looking upstream, 84 feet from the outfall
Note: The content on this page was originally created as part of DamOutletWorks.org (DOWL, 2018). It has subsequently been updated and reformatted as part of the Dam Safety Toolbox.
Revision ID: 4656
Revision Date: 12/02/2022