Drain Sizing: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
[[Category:Seepage Analysis and Filter Design]] | |||
---- | ---- | ||
“Adequate drainage should be provided under floor slabs for spillways and stilling basins to reduce uplift pressures. For soil foundations, a drainage blanket under the slab with transverse perforated pipe drains discharging through the walls or floor is generally provided, supplemented in the case of stratified foundations by deep well stems. Drainage of a slab on rock is usually accomplished by drain holes drilled in the rick with formed holes or pipes through the slab. The drainage blanket is designed to convey the seepage quickly and effectively to the transverse collector drains. It is designed as a graded reverse filter with coarse stones adjacent to the perforated drain pipe and finer material adjacent to the concrete structure to prevent the migration of fines into the drains. Outlets for transverse drains in the spillway chute discharge through the walls or floor at as low an elevation as practical to obtain maximum pressure reduction. Wall outlets should be 1 ft minimum above the floor to prevent blocking by debris. Cutoffs are provided at each transverse collector pipe to minimize buildup of head in case of malfunction of the pipe drain. Drains should be at least 6 in. in diameter and have at least two outlets to minimize the chance of plugging. Outlets should be provided with flat-type check valves to prevent surging and the entrance of foreign matter in the drainage system. For the stilling basin floor slab, it may be advantageous to place a connecting header along each wall and discharge all slab drainage into the stilling basin just upstream from the hydraulic jump at the lowest practical elevation in order to secure the maximum reduction of uplift of uplift for the downstream portion of the slab. A closer spacing of drains is usually required than in the spillway chute because of greater head and considerable difference in water depth in a short distance through the hydraulic jump. Piezometers should be installed in the drainage blanket and deeper strata, if necessary, to monitor the performance of the drainage system. If the drains or wells become plugged or otherwise noneffective, uplift pressures will increase which could adversely affect the stability of the structure (EM 1110-2-1602, EM 1110-2-1603, and EM 1110-2-1901)”. <ref name="USACE">[[General Design and Construction Considerations for Earth and Rock-Fill Dams (EM 1110-2-2300) | EM 1110-2-2300 General Design and Construction Considerations for Earth and Rock-Fill Dams, USACE, 2004]]</ref> | “Adequate drainage should be provided under floor slabs for [[spillways]] and stilling basins to reduce uplift pressures. For soil foundations, a drainage blanket under the slab with transverse perforated pipe drains discharging through the walls or floor is generally provided, supplemented in the case of stratified foundations by deep well stems. Drainage of a slab on rock is usually accomplished by drain holes drilled in the rick with formed holes or pipes through the slab. The drainage blanket is designed to convey the seepage quickly and effectively to the transverse collector drains. It is designed as a graded reverse filter with coarse stones adjacent to the perforated drain pipe and finer material adjacent to the concrete structure to prevent the migration of fines into the drains. Outlets for transverse drains in the spillway chute discharge through the walls or floor at as low an elevation as practical to obtain maximum pressure reduction. Wall outlets should be 1 ft minimum above the floor to prevent blocking by debris. Cutoffs are provided at each transverse collector pipe to minimize buildup of head in case of malfunction of the pipe drain. Drains should be at least 6 in. in diameter and have at least two outlets to minimize the chance of plugging. Outlets should be provided with flat-type check valves to prevent surging and the entrance of foreign matter in the drainage system. For the stilling basin floor slab, it may be advantageous to place a connecting header along each wall and discharge all slab drainage into the stilling basin just upstream from the hydraulic jump at the lowest practical elevation in order to secure the maximum reduction of uplift of uplift for the downstream portion of the slab. A closer spacing of drains is usually required than in the spillway chute because of greater head and considerable difference in water depth in a short distance through the hydraulic jump. Piezometers should be installed in the drainage blanket and deeper strata, if necessary, to monitor the performance of the drainage system. If the drains or wells become plugged or otherwise noneffective, uplift pressures will increase which could adversely affect the [[stability]] of the structure (EM 1110-2-1602, EM 1110-2-1603, and EM 1110-2-1901)”. <ref name="USACE">[[General Design and Construction Considerations for Earth and Rock-Fill Dams (EM 1110-2-2300) | EM 1110-2-2300 General Design and Construction Considerations for Earth and Rock-Fill Dams, USACE, 2004]]</ref> | ||
==Examples== | ==Examples== | ||
| Line 14: | Line 15: | ||
</br> | </br> | ||
Citations: | Citations: | ||
<references /> | <[[references]] /> | ||
<!-- Revision history information --> | <!-- Revision history information --> | ||
{{revhistinf}} | {{revhistinf}} | ||
Revision as of 05:32, 18 November 2022
“Adequate drainage should be provided under floor slabs for spillways and stilling basins to reduce uplift pressures. For soil foundations, a drainage blanket under the slab with transverse perforated pipe drains discharging through the walls or floor is generally provided, supplemented in the case of stratified foundations by deep well stems. Drainage of a slab on rock is usually accomplished by drain holes drilled in the rick with formed holes or pipes through the slab. The drainage blanket is designed to convey the seepage quickly and effectively to the transverse collector drains. It is designed as a graded reverse filter with coarse stones adjacent to the perforated drain pipe and finer material adjacent to the concrete structure to prevent the migration of fines into the drains. Outlets for transverse drains in the spillway chute discharge through the walls or floor at as low an elevation as practical to obtain maximum pressure reduction. Wall outlets should be 1 ft minimum above the floor to prevent blocking by debris. Cutoffs are provided at each transverse collector pipe to minimize buildup of head in case of malfunction of the pipe drain. Drains should be at least 6 in. in diameter and have at least two outlets to minimize the chance of plugging. Outlets should be provided with flat-type check valves to prevent surging and the entrance of foreign matter in the drainage system. For the stilling basin floor slab, it may be advantageous to place a connecting header along each wall and discharge all slab drainage into the stilling basin just upstream from the hydraulic jump at the lowest practical elevation in order to secure the maximum reduction of uplift of uplift for the downstream portion of the slab. A closer spacing of drains is usually required than in the spillway chute because of greater head and considerable difference in water depth in a short distance through the hydraulic jump. Piezometers should be installed in the drainage blanket and deeper strata, if necessary, to monitor the performance of the drainage system. If the drains or wells become plugged or otherwise noneffective, uplift pressures will increase which could adversely affect the stability of the structure (EM 1110-2-1602, EM 1110-2-1603, and EM 1110-2-1901)”. [1]
Examples
Learn more about filters and drains for outlet works
Learn more good practices for pipe installation
Best Practices Resources
General Design and Construction Considerations for Earth and Rock-Fill Dams (EM 1110-2-2300)
Trainings
On-Demand Webinar: Filters and Drainage Systems for Embankment Dams
On-Demand Webinar: Internal Drainage Systems for Embankment Dams
Citations:
<references />
Revision ID: 4475
Revision Date: 11/18/2022