Pipe Deterioration - Revision history

Grichards at 23:58, 1 December 2022

2022-12-01T23:58:53Z

← Older revision		Revision as of 23:58, 1 December 2022
Line 1:		Line 1:
			[[Category:Existing Conditions Outlet Works]]
	It is important to assess the condition of the conduit early in the process. Further actions all depend on this important factor.		It is important to assess the condition of the conduit early in the process. Further actions all depend on this important factor.

	==CMP==		==CMP==
	Corrugated Metal Pipes (CMP) have been used for the outlet works in many small dams. Undetected corrosion or distress in the pipe is common, and may be an initiator of embankment piping. The deterioration of most old CMPs is an area of concern for dam owners, regulators, and engineers. Cases have been documented where CMP has deteriorated in less than 7 years after construction.		Corrugated Metal Pipes (CMP) have been used for the outlet works in many small dams. Undetected corrosion or distress in the pipe is common, and may be an initiator of embankment piping. The deterioration of most old CMPs is an area of concern for dam owners, regulators, and engineers. Cases have been documented where CMP has deteriorated in less than 7 years after [[construction]].

	'''Corrosion:'''</br>		'''Corrosion:'''</br>
	Uncoated CMP is susceptible to corrosion from a number of sources: soil, groundwater, and water in the pipe. When the corrosion advances to a point where holes begin to develop, water flows into or out of the pipe and begins to erode the soil around the pipe. The rate of deterioration often increases with time.		Uncoated CMP is susceptible to corrosion from a number of sources: soil, [[groundwater]], and water in the pipe. When the corrosion advances to a point where holes begin to develop, water flows into or out of the pipe and begins to erode the soil around the pipe. The rate of deterioration often increases with time.

	*[[Deterioration Accelerates with Time]]		*[[Deterioration Accelerates with Time]]
Line 28:		Line 29:

	==Concrete==		==Concrete==
	Reinforced Concrete Pipe (RCP) is often used in small dams. RCP is corrosion resistant, can be placed under large fills, is hydraulically efficient, and has a long design life. Concrete is a high quality product. Understanding common problems is important to effectively assessing your conduit.		[[Reinforced Concrete]] Pipe (RCP) is often used in small dams. RCP is corrosion resistant, can be placed under large fills, is hydraulically efficient, and has a long design life. Concrete is a high quality product. Understanding common problems is important to effectively assessing your conduit.

	'''Types of Concrete Pipe Damage:'''</br>		'''Types of Concrete Pipe Damage:'''</br>
	Common issues to look for during inspections of RCP conduits are cracks in the conduit and spalled concrete. Cracks are expected in concrete, knowing what size crack to be concerned about is important. Cracks in the conduit typically occur at the transition immediately downstream of the control structure due to differential settlement. Spalling often occus in precast concrete pipe at the joint locations.		Common issues to look for during [[inspections]] of RCP conduits are cracks in the conduit and spalled concrete. Cracks are expected in concrete, knowing what size crack to be concerned about is important. Cracks in the conduit typically occur at the transition immediately downstream of the control structure due to differential [[settlement]]. Spalling often occus in precast concrete pipe at the joint locations.
	*[[Exposed Steel]]		*[[Exposed Steel]]
	*[[Longitudinal Cracking]]		*[[Longitudinal Cracking]]

Grichards at 19:38, 15 September 2022

2022-09-15T19:38:27Z

← Older revision		Revision as of 19:38, 15 September 2022
Line 47:		Line 47:
	*[[Continuous Flows can Reduce Deterioration in Downstream Valves]]		*[[Continuous Flows can Reduce Deterioration in Downstream Valves]]


			''Note: The content on this page was originally created as part of DamOutletWorks.org (DOWL, 2018). It has subsequently been updated and reformatted as part of the Dam Safety Toolbox.''
	[[Category:Example Pages]]		[[Category:Example Pages]]
	{{Revhistinf}}		{{Revhistinf}}

Camrenbt at 16:02, 11 August 2022

2022-08-11T16:02:28Z

← Older revision		Revision as of 16:02, 11 August 2022
Line 1:		Line 1:
	It is important to assess the condition of the conduit early in the process. Further actions all depend on this important factor.		It is important to assess the condition of the conduit early in the process. Further actions all depend on this important factor.
	~~----~~
	==CMP==		==CMP==
	Corrugated Metal Pipes (CMP) have been used for the outlet works in many small dams. Undetected corrosion or distress in the pipe is common, and may be an initiator of embankment piping. The deterioration of most old CMPs is an area of concern for dam owners, regulators, and engineers. Cases have been documented where CMP has deteriorated in less than 7 years after construction.		Corrugated Metal Pipes (CMP) have been used for the outlet works in many small dams. Undetected corrosion or distress in the pipe is common, and may be an initiator of embankment piping. The deterioration of most old CMPs is an area of concern for dam owners, regulators, and engineers. Cases have been documented where CMP has deteriorated in less than 7 years after construction.

Camrenbt at 17:10, 23 June 2022

2022-06-23T17:10:08Z

← Older revision		Revision as of 17:10, 23 June 2022
Line 46:		Line 46:
	Smooth steel conduits are typically coated in the factory, but joints are coated in the field. When coatings deteriorate, corrosion begins. Smooth steel pipe is typically much thicker than Corrugated Metal Pipes and will take longer to develop corrosion holes. Corrosion is still a serious concern, regardless of how thick the pipe is.		Smooth steel conduits are typically coated in the factory, but joints are coated in the field. When coatings deteriorate, corrosion begins. Smooth steel pipe is typically much thicker than Corrugated Metal Pipes and will take longer to develop corrosion holes. Corrosion is still a serious concern, regardless of how thick the pipe is.
	*[[Continuous Flows can Reduce Deterioration in Downstream Valves]]		*[[Continuous Flows can Reduce Deterioration in Downstream Valves]]

			[[Category:Example Pages]]
			{{Revhistinf}}

Camrenbt at 22:50, 21 June 2022

2022-06-21T22:50:17Z

Camrenbt at 21:36, 20 June 2022

2022-06-20T21:36:58Z

Camrenbt: Created page with "It is important to assess the condition of the conduit early in the process. Further actions all depend on this important factor. ---- ==CMP== Corrugated Metal Pipes (CMP) have been used for the outlet works in many small dams. Undetected corrosion or distress in the pipe is common, and may be an initiator of embankment piping. The deterioration of most old CMPs is an area of concern for dam owners, regulators, and engineers. Cases have been documented where CMP has det..."

2022-06-20T19:48:13Z

Created page with "It is important to assess the condition of the conduit early in the process. Further actions all depend on this important factor. ---- ==CMP== Corrugated Metal Pipes (CMP) have been used for the outlet works in many small dams. Undetected corrosion or distress in the pipe is common, and may be an initiator of embankment piping. The deterioration of most old CMPs is an area of concern for dam owners, regulators, and engineers. Cases have been documented where CMP has det..."

New page

It is important to assess the condition of the conduit early in the process. Further actions all depend on this important factor.
----
==CMP==
Corrugated Metal Pipes (CMP) have been used for the outlet works in many small dams. Undetected corrosion or distress in the pipe is common, and may be an initiator of embankment piping. The deterioration of most old CMPs is an area of concern for dam owners, regulators, and engineers. Cases have been documented where CMP has deteriorated in less than 7 years after construction.

===Corrosion===
Uncoated CMP is susceptible to corrosion from a number of sources: soil, groundwater, and water in the pipe. When the corrosion advances to a point where holes begin to develop, water flows into or out of the pipe and begins to erode the soil around the pipe. The rate of deterioration often increases with time.

[[Deterioration Accelerates with Time]]
[[Extent of Corrosion May Limit Repair Options]]
[[Deterioration at Invert is Hard to Detect]]
[[Corrosion Occurs from Outside In]]
[[Inspect Full Length of Pipe]]

===Joints and Connections===
Connections are often the weakest part of an aging CMP outlet works.
[[Connection between Riser and Conduit often First to Fail]]

===Metal Pipe Treatments===
Common treatments for Corrugated Metal Pipe include galvanizing, aluminizing, polymer coating, and bituminous coating. Proper coatings significantly increase the performance of Corrugated Metal Pipe.

[[Bituminous Coating Impact on Design Life of Pipe]]
[[Treatment Types]]

===Abrasion of Coatings===
Gravel & Sand in outlet flow can abrade coating and steel over time.
Abrasion is one of the common causes of pipe deterioration. For CMPs, it is primarily a concern for pipe coatings. When a coating becomes damaged, the bare steel is in direct contact with water, which significantly increasing the likelihood of corrosion.

==Concrete==
Reinforced Concrete Pipe (RCP) is often used in small dams. RCP is corrosion resistant, can be placed under large fills, is hydraulically efficient, and has a long design life. Concrete is a high quality product. Understanding common problems is important to effectively assessing your conduit.

===Types of Concrete Pipe Damage===
Common issues to look for during inspections of RCP conduits are cracks in the conduit and spalled concrete. Cracks are expected in concrete, knowing what size crack to be concerned about is important. Cracks in the conduit typically occur at the transition immediately downstream of the control structure due to differential settlement. Spalling often occus in precast concrete pipe at the joint locations.
[[Exposed Steel]]
[[Longitudinal Cracking]]

===Joints and Connections===
RCP conduits are connected using a bell and spigot type of connection and can be constructed to accomodate some expected settlement along the conduit alignment due to the flexibility provided at each joint location. However, joints and connections are common places for water and soil to flow into your pipe. Inspectors should assess all joints and any connections to the pipe
[[Joint Deterioration - Pay me now or pay me later]]

===Quality concrete can provide a very long service life===
Concrete can last a very long time. High quality concrete typically won't burn, rust, tear, buckle, deflect, and it's immune to the attack of most elements. If it looks good, it probably is!
[[Service Life]]

==Steel/Ductile Iron/Cast Iron==
Smooth steel conduits are typically coated in the factory, but joints are coated in the field. When coatings deteriorate, corrosion begins. Smooth steel pipe is typically much thicker than Corrugated Metal Pipes and will take longer to develop corrosion holes. Corrosion is still a serious concern, regardless of how thick the pipe is.
[[Continuous Flows can Reduce Deterioration in Downstream Valves]]

← Older revision		Revision as of 22:50, 21 June 2022
Line 13:		Line 13:
	*[[Inspect Full Length of Pipe]]		*[[Inspect Full Length of Pipe]]

	Joints and Connections:'''</br>		'''Joints and Connections:'''</br>
	Connections are often the weakest part of an aging CMP outlet works.		Connections are often the weakest part of an aging CMP outlet works.
	*[[Connection between Riser and Conduit often First to Fail]]		*[[Connection between Riser and Conduit often First to Fail]]

	Metal Pipe Treatments:'''</br>		'''Metal Pipe Treatments:'''</br>
	Common treatments for Corrugated Metal Pipe include galvanizing, aluminizing, polymer coating, and bituminous coating. Proper coatings significantly increase the performance of Corrugated Metal Pipe.		Common treatments for Corrugated Metal Pipe include galvanizing, aluminizing, polymer coating, and bituminous coating. Proper coatings significantly increase the performance of Corrugated Metal Pipe.

Line 23:		Line 23:
	*[[Treatment Types]]		*[[Treatment Types]]

	Abrasion of Coatings:'''</br>		'''Abrasion of Coatings:'''</br>
	Gravel & Sand in outlet flow can abrade coating and steel over time.		Gravel & Sand in outlet flow can abrade coating and steel over time.
	Abrasion is one of the common causes of pipe deterioration. For CMPs, it is primarily a concern for pipe coatings. When a coating becomes damaged, the bare steel is in direct contact with water, which significantly increasing the likelihood of corrosion.		Abrasion is one of the common causes of pipe deterioration. For CMPs, it is primarily a concern for pipe coatings. When a coating becomes damaged, the bare steel is in direct contact with water, which significantly increasing the likelihood of corrosion.
Line 30:		Line 30:
	Reinforced Concrete Pipe (RCP) is often used in small dams. RCP is corrosion resistant, can be placed under large fills, is hydraulically efficient, and has a long design life. Concrete is a high quality product. Understanding common problems is important to effectively assessing your conduit.		Reinforced Concrete Pipe (RCP) is often used in small dams. RCP is corrosion resistant, can be placed under large fills, is hydraulically efficient, and has a long design life. Concrete is a high quality product. Understanding common problems is important to effectively assessing your conduit.

	Types of Concrete Pipe Damage:'''</br>		'''Types of Concrete Pipe Damage:'''</br>
	Common issues to look for during inspections of RCP conduits are cracks in the conduit and spalled concrete. Cracks are expected in concrete, knowing what size crack to be concerned about is important. Cracks in the conduit typically occur at the transition immediately downstream of the control structure due to differential settlement. Spalling often occus in precast concrete pipe at the joint locations.		Common issues to look for during inspections of RCP conduits are cracks in the conduit and spalled concrete. Cracks are expected in concrete, knowing what size crack to be concerned about is important. Cracks in the conduit typically occur at the transition immediately downstream of the control structure due to differential settlement. Spalling often occus in precast concrete pipe at the joint locations.
	*[[Exposed Steel]]		*[[Exposed Steel]]
	*[[Longitudinal Cracking]]		*[[Longitudinal Cracking]]

	Joints and Connections:'''</br>		'''Joints and Connections:'''</br>
	RCP conduits are connected using a bell and spigot type of connection and can be constructed to accomodate some expected settlement along the conduit alignment due to the flexibility provided at each joint location. However, joints and connections are common places for water and soil to flow into your pipe. Inspectors should assess all joints and any connections to the pipe		RCP conduits are connected using a bell and spigot type of connection and can be constructed to accomodate some expected settlement along the conduit alignment due to the flexibility provided at each joint location. However, joints and connections are common places for water and soil to flow into your pipe. Inspectors should assess all joints and any connections to the pipe
	*[[Joint Deterioration - Pay me now or pay me later]]		*[[Joint Deterioration - Pay me now or pay me later]]

	Quality concrete can provide a very long service life:'''</br>		'''Quality concrete can provide a very long service life:'''</br>
	Concrete can last a very long time. High quality concrete typically won't burn, rust, tear, buckle, deflect, and it's immune to the attack of most elements. If it looks good, it probably is!		Concrete can last a very long time. High quality concrete typically won't burn, rust, tear, buckle, deflect, and it's immune to the attack of most elements. If it looks good, it probably is!
	*[[Service Life]]		*[[Service Life]]

← Older revision		Revision as of 21:36, 20 June 2022
Line 4:		Line 4:
	Corrugated Metal Pipes (CMP) have been used for the outlet works in many small dams. Undetected corrosion or distress in the pipe is common, and may be an initiator of embankment piping. The deterioration of most old CMPs is an area of concern for dam owners, regulators, and engineers. Cases have been documented where CMP has deteriorated in less than 7 years after construction.		Corrugated Metal Pipes (CMP) have been used for the outlet works in many small dams. Undetected corrosion or distress in the pipe is common, and may be an initiator of embankment piping. The deterioration of most old CMPs is an area of concern for dam owners, regulators, and engineers. Cases have been documented where CMP has deteriorated in less than 7 years after construction.

	~~===~~Corrosion~~===~~		'''Corrosion:'''</br>
	Uncoated CMP is susceptible to corrosion from a number of sources: soil, groundwater, and water in the pipe. When the corrosion advances to a point where holes begin to develop, water flows into or out of the pipe and begins to erode the soil around the pipe. The rate of deterioration often increases with time.		Uncoated CMP is susceptible to corrosion from a number of sources: soil, groundwater, and water in the pipe. When the corrosion advances to a point where holes begin to develop, water flows into or out of the pipe and begins to erode the soil around the pipe. The rate of deterioration often increases with time.

	[[Deterioration Accelerates with Time]]		*[[Deterioration Accelerates with Time]]
	[[Extent of Corrosion May Limit Repair Options]]		*[[Extent of Corrosion May Limit Repair Options]]
	[[Deterioration at Invert is Hard to Detect]]		*[[Deterioration at Invert is Hard to Detect]]
	[[Corrosion Occurs from Outside In]]		*[[Corrosion Occurs from Outside In]]
	[[Inspect Full Length of Pipe]]		*[[Inspect Full Length of Pipe]]

	~~===~~Joints and Connections~~===~~		Joints and Connections:'''</br>
	Connections are often the weakest part of an aging CMP outlet works.		Connections are often the weakest part of an aging CMP outlet works.
	[[Connection between Riser and Conduit often First to Fail]]		*[[Connection between Riser and Conduit often First to Fail]]

	~~===~~Metal Pipe Treatments~~===~~		Metal Pipe Treatments:'''</br>
	Common treatments for Corrugated Metal Pipe include galvanizing, aluminizing, polymer coating, and bituminous coating. Proper coatings significantly increase the performance of Corrugated Metal Pipe.		Common treatments for Corrugated Metal Pipe include galvanizing, aluminizing, polymer coating, and bituminous coating. Proper coatings significantly increase the performance of Corrugated Metal Pipe.

	[[Bituminous Coating Impact on Design Life of Pipe]]		*[[Bituminous Coating Impact on Design Life of Pipe]]
	[[Treatment Types]]		*[[Treatment Types]]

	~~===~~Abrasion of Coatings~~===~~		Abrasion of Coatings:'''</br>
	Gravel & Sand in outlet flow can abrade coating and steel over time.		Gravel & Sand in outlet flow can abrade coating and steel over time.
	Abrasion is one of the common causes of pipe deterioration. For CMPs, it is primarily a concern for pipe coatings. When a coating becomes damaged, the bare steel is in direct contact with water, which significantly increasing the likelihood of corrosion.		Abrasion is one of the common causes of pipe deterioration. For CMPs, it is primarily a concern for pipe coatings. When a coating becomes damaged, the bare steel is in direct contact with water, which significantly increasing the likelihood of corrosion.
Line 30:		Line 30:
	Reinforced Concrete Pipe (RCP) is often used in small dams. RCP is corrosion resistant, can be placed under large fills, is hydraulically efficient, and has a long design life. Concrete is a high quality product. Understanding common problems is important to effectively assessing your conduit.		Reinforced Concrete Pipe (RCP) is often used in small dams. RCP is corrosion resistant, can be placed under large fills, is hydraulically efficient, and has a long design life. Concrete is a high quality product. Understanding common problems is important to effectively assessing your conduit.

	~~===~~Types of Concrete Pipe Damage~~===~~		Types of Concrete Pipe Damage:'''</br>
	Common issues to look for during inspections of RCP conduits are cracks in the conduit and spalled concrete. Cracks are expected in concrete, knowing what size crack to be concerned about is important. Cracks in the conduit typically occur at the transition immediately downstream of the control structure due to differential settlement. Spalling often occus in precast concrete pipe at the joint locations.		Common issues to look for during inspections of RCP conduits are cracks in the conduit and spalled concrete. Cracks are expected in concrete, knowing what size crack to be concerned about is important. Cracks in the conduit typically occur at the transition immediately downstream of the control structure due to differential settlement. Spalling often occus in precast concrete pipe at the joint locations.
	[[Exposed Steel]]		*[[Exposed Steel]]
	[[Longitudinal Cracking]]		*[[Longitudinal Cracking]]

	~~===~~Joints and Connections~~===~~		Joints and Connections:'''</br>
	RCP conduits are connected using a bell and spigot type of connection and can be constructed to accomodate some expected settlement along the conduit alignment due to the flexibility provided at each joint location. However, joints and connections are common places for water and soil to flow into your pipe. Inspectors should assess all joints and any connections to the pipe		RCP conduits are connected using a bell and spigot type of connection and can be constructed to accomodate some expected settlement along the conduit alignment due to the flexibility provided at each joint location. However, joints and connections are common places for water and soil to flow into your pipe. Inspectors should assess all joints and any connections to the pipe
	[[Joint Deterioration - Pay me now or pay me later]]		*[[Joint Deterioration - Pay me now or pay me later]]

	~~===~~Quality concrete can provide a very long service life~~===~~		Quality concrete can provide a very long service life:'''</br>
	Concrete can last a very long time. High quality concrete typically won't burn, rust, tear, buckle, deflect, and it's immune to the attack of most elements. If it looks good, it probably is!		Concrete can last a very long time. High quality concrete typically won't burn, rust, tear, buckle, deflect, and it's immune to the attack of most elements. If it looks good, it probably is!
	[[Service Life]]		*[[Service Life]]

	==Steel/Ductile Iron/Cast Iron==		==Steel/Ductile Iron/Cast Iron==
	Smooth steel conduits are typically coated in the factory, but joints are coated in the field. When coatings deteriorate, corrosion begins. Smooth steel pipe is typically much thicker than Corrugated Metal Pipes and will take longer to develop corrosion holes. Corrosion is still a serious concern, regardless of how thick the pipe is.		Smooth steel conduits are typically coated in the factory, but joints are coated in the field. When coatings deteriorate, corrosion begins. Smooth steel pipe is typically much thicker than Corrugated Metal Pipes and will take longer to develop corrosion holes. Corrosion is still a serious concern, regardless of how thick the pipe is.
	[[Continuous Flows can Reduce Deterioration in Downstream Valves]]		*[[Continuous Flows can Reduce Deterioration in Downstream Valves]]