Flumes - Revision history

Mpollei@gfnet.com at 16:40, 11 July 2023

2023-07-11T16:40:53Z

← Older revision		Revision as of 16:40, 11 July 2023
Line 3:		Line 3:
	----		----
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	“The most common structures used to measure flow in open channels operate by producing critical flow or flow at critical-depth through a control section of known dimensions. Under this flow condition, the discharge through the critical section is a function of the section shape and the upstream potential energy, as indicated by the water level upstream from the structure. By definition, the presence of critical flow in the control section prevents the downstream water level and flow conditions from affecting the flow through the critical section, and the discharge can be computed as a function of the measured upstream head. Sharp-crested [[weirs]], broad-crested weirs, and a wide variety of flumes are examples of critical-flow devices”.<ref name="PUB58">[[Pub 58 – Flow Measurement \| Pub 58 – Flow Measurement, USBR, 2001]]</ref>		“The most common structures used to measure flow in open channels operate by producing critical flow or flow at critical-depth through a control section of known dimensions. Under this flow condition, the discharge through the critical section is a function of the section shape and the upstream potential energy, as indicated by the water level upstream from the structure. By definition, the presence of critical flow in the control section prevents the downstream water level and flow conditions from affecting the flow through the critical section, and the discharge can be computed as a function of the measured upstream head. Sharp-crested [[weirs]], [[Broad-Crested Weirs\|broad-crested weirs]], and a wide variety of flumes are examples of critical-flow devices”.<ref name="PUB58">[[Pub 58 – Flow Measurement \| Pub 58 – Flow Measurement, USBR, 2001]]</ref>

	“Long-throated flumes are generally composed from five primary [[structural]] components:		“Long-throated flumes are generally composed from five primary [[structural]] components:
Line 15:		Line 15:

	<noautolinks>==Best Practices Resources==</noautolinks>		<noautolinks>==Best Practices Resources==</noautolinks>
	{{Document Icon}} [[Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance \| Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance, FERC~~, 2018~~]]		{{Document Icon}} [[Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance \| Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance, FERC]]

	<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->		<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->

Rmanwaring at 00:40, 14 December 2022

2022-12-14T00:40:48Z

← Older revision		Revision as of 00:40, 14 December 2022
Line 3:		Line 3:
	----		----
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	“The most common structures used to measure flow in open channels operate by producing critical flow or flow at critical-depth through a control section of known dimensions. Under this flow condition, the discharge through the critical section is a function of the section shape and the upstream potential energy, as indicated by the water level upstream from the structure. By definition, the presence of critical flow in the control section prevents the downstream water level and flow conditions from affecting the flow through the critical section, and the discharge can be computed as a function of the measured upstream head. Sharp-crested weirs, broad-crested weirs, and a wide variety of flumes are examples of critical-flow devices”.<ref name="PUB58">[[Pub 58 – Flow Measurement \| Pub 58 – Flow Measurement, USBR, 2001]]</ref>		“The most common structures used to measure flow in open channels operate by producing critical flow or flow at critical-depth through a control section of known dimensions. Under this flow condition, the discharge through the critical section is a function of the section shape and the upstream potential energy, as indicated by the water level upstream from the structure. By definition, the presence of critical flow in the control section prevents the downstream water level and flow conditions from affecting the flow through the critical section, and the discharge can be computed as a function of the measured upstream head. Sharp-crested [[weirs]], broad-crested weirs, and a wide variety of flumes are examples of critical-flow devices”.<ref name="PUB58">[[Pub 58 – Flow Measurement \| Pub 58 – Flow Measurement, USBR, 2001]]</ref>

	“Long-throated flumes are generally composed from five primary [[structural]] components:		“Long-throated flumes are generally composed from five primary [[structural]] components:
Line 14:		Line 14:
	In addition to these five structural components, a gaging station in the approach channel is necessary. At the gaging station, the difference in elevation between the approach water level and the sill or crest of the throat section will be measured. This difference in elevation is known as the sill-referenced head. The flow rate through the flume will be computed as a function of this upstream sill-referenced head”.<ref name="PUB58" />		In addition to these five structural components, a gaging station in the approach channel is necessary. At the gaging station, the difference in elevation between the approach water level and the sill or crest of the throat section will be measured. This difference in elevation is known as the sill-referenced head. The flow rate through the flume will be computed as a function of this upstream sill-referenced head”.<ref name="PUB58" />

	==Best Practices Resources==		<noautolinks>==Best Practices Resources==</noautolinks>
	{{Document Icon}} [[Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance\|Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance ~~(Federal Energy Regulatory Commission)~~]]		{{Document Icon}} [[Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance \| Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance, FERC, 2018]]

	<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->		<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->

Grichards at 02:52, 18 November 2022

2022-11-18T02:52:30Z

← Older revision		Revision as of 02:52, 18 November 2022
Line 1:		Line 1:
	__NOTOC__		__NOTOC__
			[[Category:Water Conveyance]]
	----		----
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	“The most common structures used to measure flow in open channels operate by producing critical flow or flow at critical-depth through a control section of known dimensions. Under this flow condition, the discharge through the critical section is a function of the section shape and the upstream potential energy, as indicated by the water level upstream from the structure. By definition, the presence of critical flow in the control section prevents the downstream water level and flow conditions from affecting the flow through the critical section, and the discharge can be computed as a function of the measured upstream head. Sharp-crested weirs, broad-crested weirs, and a wide variety of flumes are examples of critical-flow devices”.<ref name="PUB58">[[Pub 58 – Flow Measurement \| Pub 58 – Flow Measurement, USBR, 2001]]</ref>		“The most common structures used to measure flow in open channels operate by producing critical flow or flow at critical-depth through a control section of known dimensions. Under this flow condition, the discharge through the critical section is a function of the section shape and the upstream potential energy, as indicated by the water level upstream from the structure. By definition, the presence of critical flow in the control section prevents the downstream water level and flow conditions from affecting the flow through the critical section, and the discharge can be computed as a function of the measured upstream head. Sharp-crested weirs, broad-crested weirs, and a wide variety of flumes are examples of critical-flow devices”.<ref name="PUB58">[[Pub 58 – Flow Measurement \| Pub 58 – Flow Measurement, USBR, 2001]]</ref>

	“Long-throated flumes are generally composed from five primary structural components:		“Long-throated flumes are generally composed from five primary [[structural]] components:
	#"An approach channel that is necessary for the development of uniform and symmetrical flow conditions and the establishment of a stable water surface whose elevation can be determined accurately. The approach channel may be lined… or may be the original earthen channel. <ref name="PUB58" />		#"An approach channel that is necessary for the development of uniform and symmetrical flow conditions and the establishment of a stable water surface whose elevation can be determined accurately. The approach channel may be lined… or may be the original earthen channel. <ref name="PUB58" />
	#"A converging transition section in which the subcritical approach flow accelerates smoothly toward the throat with no discontinuities or flow separation – the transition may consist of plane surfaces or may be rounded. <ref name="PUB58" />		#"A converging transition section in which the subcritical approach flow accelerates smoothly toward the throat with no discontinuities or flow separation – the transition may consist of plane surfaces or may be rounded. <ref name="PUB58" />
	#"A throat, or control section, in which the flow passes through critical depth. The throat must be horizontal in the direction of flow, but in the direction perpendicular to the flow any shape may be used. <ref name="PUB58" />		#"A throat, or control section, in which the flow passes through critical depth. The throat must be horizontal in the direction of flow, but in the direction perpendicular to the flow any shape may be used. <ref name="PUB58" />
	#"A diverging transition in which the velocity of the supercritical flow exiting the throat section is reduced and energy is dissipated or partially recovered – if energy recovery is not needed, an abrupt transition can be used. <ref name="PUB58" />		#"A diverging transition in which the velocity of the supercritical flow exiting the throat section is reduced and energy is dissipated or partially recovered – if energy [[recovery]] is not needed, an abrupt transition can be used. <ref name="PUB58" />
	#"A tailwater channel where the water level is a function of the flow rate and the hydraulic properties of the downstream channel and structures. The range of water levels in this channel is fundamentally important to the design of the structure because it determines the elevation and size of the control section needed to maintain critical flow through the flume.<ref name="PUB58" />		#"A tailwater channel where the water level is a function of the flow rate and the hydraulic properties of the downstream channel and structures. The range of water levels in this channel is fundamentally important to the design of the structure because it determines the elevation and size of the control section needed to maintain critical flow through the flume.<ref name="PUB58" />
	</br>		</br>

Grichards at 05:56, 16 September 2022

2022-09-16T05:56:29Z

← Older revision		Revision as of 05:56, 16 September 2022
Line 13:		Line 13:
	In addition to these five structural components, a gaging station in the approach channel is necessary. At the gaging station, the difference in elevation between the approach water level and the sill or crest of the throat section will be measured. This difference in elevation is known as the sill-referenced head. The flow rate through the flume will be computed as a function of this upstream sill-referenced head”.<ref name="PUB58" />		In addition to these five structural components, a gaging station in the approach channel is necessary. At the gaging station, the difference in elevation between the approach water level and the sill or crest of the throat section will be measured. This difference in elevation is known as the sill-referenced head. The flow rate through the flume will be computed as a function of this upstream sill-referenced head”.<ref name="PUB58" />

	~~==Examples==~~
	~~{{Website Icon}}~~
	==Best Practices Resources==		==Best Practices Resources==
	{{Document Icon}} [[~~Pub 58 – Flow Measurement~~]]		{{Document Icon}} [[Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance\|Engineering Guidelines for the Evaluation of Hydropower Projects: Chapter 12- Water Conveyance (Federal Energy Regulatory Commission)]]
	~~==Trainings==~~
	~~{{Video Icon}}~~

	<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->		<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->

Rmanwaring: Created page with "NOTOC ---- “The most common structures used to measure flow in open channels operate by producing critical flow or flow at critical-depth through a control section of known dimensions. Under this flow condition, the discharge through the critical section is a function of the section shape and the upstream potential energy, as indicated by the water level upstream from..."

2022-09-07T23:12:03Z

Created page with "__NOTOC__ ----  “The most common structures used to measure flow in open channels operate by producing critical flow or flow at critical-depth through a control section of known dimensions. Under this flow condition, the discharge through the critical section is a function of the section shape and the upstream potential energy, as indicated by the water level upstream from..."

New page

__NOTOC__
----

“The most common structures used to measure flow in open channels operate by producing critical flow or flow at critical-depth through a control section of known dimensions. Under this flow condition, the discharge through the critical section is a function of the section shape and the upstream potential energy, as indicated by the water level upstream from the structure. By definition, the presence of critical flow in the control section prevents the downstream water level and flow conditions from affecting the flow through the critical section, and the discharge can be computed as a function of the measured upstream head. Sharp-crested weirs, broad-crested weirs, and a wide variety of flumes are examples of critical-flow devices”.<ref name="PUB58">[[Pub 58 – Flow Measurement | Pub 58 – Flow Measurement, USBR, 2001]]</ref>

“Long-throated flumes are generally composed from five primary structural components:
#"An approach channel that is necessary for the development of uniform and symmetrical flow conditions and the establishment of a stable water surface whose elevation can be determined accurately. The approach channel may be lined… or may be the original earthen channel. <ref name="PUB58" />
#"A converging transition section in which the subcritical approach flow accelerates smoothly toward the throat with no discontinuities or flow separation – the transition may consist of plane surfaces or may be rounded. <ref name="PUB58" />
#"A throat, or control section, in which the flow passes through critical depth. The throat must be horizontal in the direction of flow, but in the direction perpendicular to the flow any shape may be used. <ref name="PUB58" />
#"A diverging transition in which the velocity of the supercritical flow exiting the throat section is reduced and energy is dissipated or partially recovered – if energy recovery is not needed, an abrupt transition can be used. <ref name="PUB58" />
#"A tailwater channel where the water level is a function of the flow rate and the hydraulic properties of the downstream channel and structures. The range of water levels in this channel is fundamentally important to the design of the structure because it determines the elevation and size of the control section needed to maintain critical flow through the flume.<ref name="PUB58" />
</br>
In addition to these five structural components, a gaging station in the approach channel is necessary. At the gaging station, the difference in elevation between the approach water level and the sill or crest of the throat section will be measured. This difference in elevation is known as the sill-referenced head. The flow rate through the flume will be computed as a function of this upstream sill-referenced head”.<ref name="PUB58" />

==Examples==
{{Website Icon}}
==Best Practices Resources==
{{Document Icon}} [[Pub 58 – Flow Measurement]]
==Trainings==
{{Video Icon}}


{{Citations}}


{{revhistinf}}