Chute Spillways - Revision history

Grichards at 23:43, 16 March 2023

2023-03-16T23:43:55Z

@@ Line 8: / Line 8: @@
 *[[Stepped Chute Spillways]]
-==Baffled Apron Spillway==
+==Best Practices Resources==
 {{Document Icon}} [[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations)|Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2022]]

Grichards at 23:42, 16 March 2023

2023-03-16T23:42:20Z

← Older revision		Revision as of 23:42, 16 March 2023
Line 3:		Line 3:
	----		----
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	Chute ~~(open channel or trough)~~ [[~~spillways~~]] ~~include baffled apron, grade control sill, stepped chute, and various shaped~~ [[~~weirs~~]]~~:<ref name="DS14">~~[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2022]]~~</ref>~~		==Types of Chute Spillways==
			*[[Baffled Apron Spillways]]
			*[[Grade Control Sill Spillways]]
			*[[Stepped Chute Spillways]]

	==Baffled Apron Spillway==		==Baffled Apron Spillway==

	This type of structure is suited for service, auxiliary, and [[Emergency Spillways\|emergency spillways]]. Baffled apron spillways provide crest control, conveyance, and [[Energy Dissipation\|energy dissipation]] in one structure. Primary considerations are associated with low to moderate hydraulic heads to ensure the baffles function properly and crest lengths are limited (i.e., significant cost increases as crest length increases). Additionally, this spillway may be practical in areas where there is limited space for a terminal structure such as a hydraulic jump stilling basin. Also, effectiveness ([[Energy Dissipation\|energy dissipation]] and discharge capacity) of baffled apron spillways can be adversely impacted by debris. An example of a baffled apron spillway is the service spillway at Reclamation’s Conconully Dam (embankment).<ref name="DS14" />		This type of structure is suited for service, auxiliary, and [[Emergency Spillways\|emergency spillways]]. Baffled apron [[spillways]] provide crest control, conveyance, and [[Energy Dissipation\|energy dissipation]] in one structure. Primary considerations are associated with low to moderate hydraulic heads to ensure the baffles function properly and crest lengths are limited (i.e., significant cost increases as crest length increases). Additionally, this spillway may be practical in areas where there is limited space for a terminal structure such as a hydraulic jump stilling basin. Also, effectiveness ([[Energy Dissipation\|energy dissipation]] and discharge capacity) of baffled apron spillways can be adversely impacted by debris. An example of a baffled apron spillway is the service spillway at Reclamation’s Conconully Dam (embankment).<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2022]]</ref>

	==Grade Control Sill Spillway==		==Grade Control Sill Spillway==
Line 19:		Line 22:
	==Various Shaped Weirs==		==Various Shaped Weirs==

	This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to [[Sharp-Crested Weirs\|sharp-crested weirs]] to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and [[Embankment Dams\|embankment dams]] and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />		This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped [[weirs]] ranging from broad-crested to [[Sharp-Crested Weirs\|sharp-crested weirs]] to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and [[Embankment Dams\|embankment dams]] and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />

	<noautolinks>==Best Practices Resources==</noautolinks>		<noautolinks>==Best Practices Resources==</noautolinks>

Rmanwaring at 00:03, 14 December 2022

2022-12-14T00:03:27Z

← Older revision		Revision as of 00:03, 14 December 2022
Line 3:		Line 3:
	----		----
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	Chute (open channel or trough) [[spillways]] include baffled apron, grade control sill, stepped chute, and various shaped [[weirs]]:<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, ~~2014~~]]</ref>		Chute (open channel or trough) [[spillways]] include baffled apron, grade control sill, stepped chute, and various shaped [[weirs]]:<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2022]]</ref>

	==Baffled Apron Spillway==		==Baffled Apron Spillway==

	This type of structure is suited for service, auxiliary, and [[Emergency Spillways\|emergency spillways]]. Baffled apron spillways provide crest control, conveyance, and [[Energy Dissipation\|energy dissipation]] in one structure. Primary considerations are associated with low to moderate hydraulic heads to ensure the baffles function properly and crest lengths are limited (i.e., significant cost increases as crest length increases). Additionally, this spillway may be practical in areas where there is limited space for a terminal structure such as a hydraulic jump stilling basin. Also, effectiveness (energy dissipation and discharge capacity) of baffled apron spillways can be adversely impacted by debris. An example of a baffled apron spillway is the service spillway at Reclamation’s Conconully Dam (embankment).<ref name="DS14" />		This type of structure is suited for service, auxiliary, and [[Emergency Spillways\|emergency spillways]]. Baffled apron spillways provide crest control, conveyance, and [[Energy Dissipation\|energy dissipation]] in one structure. Primary considerations are associated with low to moderate hydraulic heads to ensure the baffles function properly and crest lengths are limited (i.e., significant cost increases as crest length increases). Additionally, this spillway may be practical in areas where there is limited space for a terminal structure such as a hydraulic jump stilling basin. Also, effectiveness ([[Energy Dissipation\|energy dissipation]] and discharge capacity) of baffled apron spillways can be adversely impacted by debris. An example of a baffled apron spillway is the service spillway at Reclamation’s Conconully Dam (embankment).<ref name="DS14" />

	==Grade Control Sill Spillway==		==Grade Control Sill Spillway==

	This type of control structure is primarily suited for auxiliary and emergency spillways; however, in some cases, it can function as a service spillway. A grade control sill is a less robust, minimal spillway typically limited to a vertical [[Reinforced Concrete\|reinforced concrete]] wall (sill) that is placed in a trench through an excavated trapezoidal channel. The grade control sill can be constructed in both rock and soil foundations. The grade control sill spillway tends to have limited reserve discharge capacity, given channel armorment could be damaged or fail due to discharges that exceed design levels. Therefore, an important consideration is to limit potential erosion during spillway [[operation]]. In summary, this type of spillway should only be used on low head situations where the hydraulic drop (vertical dimension between the reservoir water surface and the downstream river or stream) can be effectively controlled, including limiting erosion potential. Examples of grade control sill spillways include the service spillway at Reclamation’s Crane Prairie Dam (embankment) and the emergency spillway at Reclamation’s Davis Creek Dam (embankment).<ref name="DS14" />		This type of control structure is primarily suited for auxiliary and [[Emergency Spillways\|emergency spillways]]; however, in some cases, it can function as a service spillway. A grade control sill is a less robust, minimal spillway typically limited to a vertical [[Reinforced Concrete\|reinforced concrete]] wall (sill) that is placed in a trench through an excavated trapezoidal channel. The grade control sill can be constructed in both rock and soil foundations. The grade control sill spillway tends to have limited reserve discharge capacity, given channel armorment could be damaged or fail due to discharges that exceed design levels. Therefore, an important consideration is to limit potential erosion during spillway [[operation]]. In summary, this type of spillway should only be used on low head situations where the hydraulic drop (vertical dimension between the reservoir water surface and the downstream river or stream) can be effectively controlled, including limiting erosion potential. Examples of grade control sill spillways include the service spillway at Reclamation’s Crane Prairie Dam (embankment) and the emergency spillway at Reclamation’s Davis Creek Dam (embankment).<ref name="DS14" />

	==Stepped Chute Spillway==		==Stepped Chute Spillway==

	This type of structure is suited for service and [[Auxiliary Spillways\|auxiliary spillways]]. Stepped spillways refer to the stepped chute portion of the spillway and have primarily been used with RCC dams, which take advantage of the RCC lift [[construction]] methods, resulting in offsets on the downstream dam face, creating the spillway steps. These steps can be formed or unformed RCC or capped with conventional concrete. A chute-type crest (flat), along with straight or curved ogee crests, are typically used in combination with stepped chutes. Other applications have involved incorporating both smooth flow surfaces and steps into a reinforced concrete spillway chute and RCC [[Overtopping Protection\|overtopping protection]] for an earth dam. A consideration for a stepped spillway involves the potential kinetic energy dissipation via the steps, which can reduce the size and type of the terminal structure. However, the kinetic energy dissipation potential may be reduced as flow depth (relative to the step size) increases (due to skimming flows). Also, consideration should be given to evaluating the [[cavitation]] potential. Examples of stepped spillways include the service spillway at Maricopa Water District’s Camp Dyer Diversion Dam (concrete), the auxiliary spillway (Joint Federal Project) at Reclamation’s Folsom Dam (composite), and the service spillway at Reclamation’s Upper Stillwater Dam (concrete). <ref name="DS14" />		This type of structure is suited for service and [[Auxiliary Spillways\|auxiliary spillways]]. Stepped spillways refer to the stepped chute portion of the spillway and have primarily been used with RCC dams, which take advantage of the RCC lift [[construction]] methods, resulting in offsets on the downstream dam face, creating the spillway steps. These steps can be formed or unformed RCC or capped with conventional concrete. A chute-type crest (flat), along with straight or curved ogee crests, are typically used in combination with stepped chutes. Other applications have involved incorporating both smooth flow surfaces and steps into a [[Reinforced Concrete\|reinforced concrete]] spillway chute and RCC [[Overtopping Protection\|overtopping protection]] for an earth dam. A consideration for a stepped spillway involves the potential kinetic energy dissipation via the steps, which can reduce the size and type of the terminal structure. However, the kinetic energy dissipation potential may be reduced as flow depth (relative to the step size) increases (due to skimming flows). Also, consideration should be given to evaluating the [[cavitation]] potential. Examples of stepped spillways include the service spillway at Maricopa Water District’s Camp Dyer Diversion Dam (concrete), the auxiliary spillway (Joint Federal Project) at Reclamation’s Folsom Dam (composite), and the service spillway at Reclamation’s Upper Stillwater Dam (concrete). <ref name="DS14" />

	==Various Shaped Weirs==		==Various Shaped Weirs==

	This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to sharp-crested weirs to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and [[Embankment Dams\|embankment dams]] and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />		This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to [[Sharp-Crested Weirs\|sharp-crested weirs]] to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and [[Embankment Dams\|embankment dams]] and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />

	<noautolinks>==Best Practices Resources==</noautolinks>		<noautolinks>==Best Practices Resources==</noautolinks>

Rmanwaring: /* Best Practices Resources */

2022-12-13T23:43:04Z

Best Practices Resources

← Older revision		Revision as of 23:43, 13 December 2022
Line 3:		Line 3:
	----		----
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	Chute (open channel or trough) [[spillways]] include baffled apron, grade control sill, stepped chute, and various shaped weirs:<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2014]]</ref>		Chute (open channel or trough) [[spillways]] include baffled apron, grade control sill, stepped chute, and various shaped [[weirs]]:<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2014]]</ref>

	==Baffled Apron Spillway==		==Baffled Apron Spillway==
Line 21:		Line 21:
	This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to sharp-crested weirs to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and [[Embankment Dams\|embankment dams]] and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />		This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to sharp-crested weirs to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and [[Embankment Dams\|embankment dams]] and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />

	==Best Practices Resources==		<noautolinks>==Best Practices Resources==</noautolinks>
	{{Document Icon}} [[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations)\|Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) ~~(Bureau of Reclamation~~]]		{{Document Icon}} [[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations)\|Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2022]]

	<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->		<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->

Grichards at 22:58, 2 December 2022

2022-12-02T22:58:43Z

← Older revision		Revision as of 22:58, 2 December 2022
Line 7:		Line 7:
	==Baffled Apron Spillway==		==Baffled Apron Spillway==

	This type of structure is suited for service, auxiliary, and emergency spillways. Baffled apron spillways provide crest control, conveyance, and energy dissipation in one structure. Primary considerations are associated with low to moderate hydraulic heads to ensure the baffles function properly and crest lengths are limited (i.e., significant cost increases as crest length increases). Additionally, this spillway may be practical in areas where there is limited space for a terminal structure such as a hydraulic jump stilling basin. Also, effectiveness (energy dissipation and discharge capacity) of baffled apron spillways can be adversely impacted by debris. An example of a baffled apron spillway is the service spillway at Reclamation’s Conconully Dam (embankment).<ref name="DS14" />		This type of structure is suited for service, auxiliary, and [[Emergency Spillways\|emergency spillways]]. Baffled apron spillways provide crest control, conveyance, and [[Energy Dissipation\|energy dissipation]] in one structure. Primary considerations are associated with low to moderate hydraulic heads to ensure the baffles function properly and crest lengths are limited (i.e., significant cost increases as crest length increases). Additionally, this spillway may be practical in areas where there is limited space for a terminal structure such as a hydraulic jump stilling basin. Also, effectiveness (energy dissipation and discharge capacity) of baffled apron spillways can be adversely impacted by debris. An example of a baffled apron spillway is the service spillway at Reclamation’s Conconully Dam (embankment).<ref name="DS14" />

	==Grade Control Sill Spillway==		==Grade Control Sill Spillway==

	This type of control structure is primarily suited for auxiliary and emergency spillways; however, in some cases, it can function as a service spillway. A grade control sill is a less robust, minimal spillway typically limited to a vertical reinforced concrete wall (sill) that is placed in a trench through an excavated trapezoidal channel. The grade control sill can be constructed in both rock and soil foundations. The grade control sill spillway tends to have limited reserve discharge capacity, given channel armorment could be damaged or fail due to discharges that exceed design levels. Therefore, an important consideration is to limit potential erosion during spillway [[operation]]. In summary, this type of spillway should only be used on low head situations where the hydraulic drop (vertical dimension between the reservoir water surface and the downstream river or stream) can be effectively controlled, including limiting erosion potential. Examples of grade control sill spillways include the service spillway at Reclamation’s Crane Prairie Dam (embankment) and the emergency spillway at Reclamation’s Davis Creek Dam (embankment).<ref name="DS14" />		This type of control structure is primarily suited for auxiliary and emergency spillways; however, in some cases, it can function as a service spillway. A grade control sill is a less robust, minimal spillway typically limited to a vertical [[Reinforced Concrete\|reinforced concrete]] wall (sill) that is placed in a trench through an excavated trapezoidal channel. The grade control sill can be constructed in both rock and soil foundations. The grade control sill spillway tends to have limited reserve discharge capacity, given channel armorment could be damaged or fail due to discharges that exceed design levels. Therefore, an important consideration is to limit potential erosion during spillway [[operation]]. In summary, this type of spillway should only be used on low head situations where the hydraulic drop (vertical dimension between the reservoir water surface and the downstream river or stream) can be effectively controlled, including limiting erosion potential. Examples of grade control sill spillways include the service spillway at Reclamation’s Crane Prairie Dam (embankment) and the emergency spillway at Reclamation’s Davis Creek Dam (embankment).<ref name="DS14" />

	==Stepped Chute Spillway==		==Stepped Chute Spillway==

	This type of structure is suited for service and auxiliary spillways. Stepped spillways refer to the stepped chute portion of the spillway and have primarily been used with RCC dams, which take advantage of the RCC lift [[construction]] methods, resulting in offsets on the downstream dam face, creating the spillway steps. These steps can be formed or unformed RCC or capped with conventional concrete. A chute-type crest (flat), along with straight or curved ogee crests, are typically used in combination with stepped chutes. Other applications have involved incorporating both smooth flow surfaces and steps into a reinforced concrete spillway chute and RCC overtopping protection for an earth dam. A consideration for a stepped spillway involves the potential kinetic energy dissipation via the steps, which can reduce the size and type of the terminal structure. However, the kinetic energy dissipation potential may be reduced as flow depth (relative to the step size) increases (due to skimming flows). Also, consideration should be given to evaluating the [[cavitation]] potential. Examples of stepped spillways include the service spillway at Maricopa Water District’s Camp Dyer Diversion Dam (concrete), the auxiliary spillway (Joint Federal Project) at Reclamation’s Folsom Dam (composite), and the service spillway at Reclamation’s Upper Stillwater Dam (concrete). <ref name="DS14" />		This type of structure is suited for service and [[Auxiliary Spillways\|auxiliary spillways]]. Stepped spillways refer to the stepped chute portion of the spillway and have primarily been used with RCC dams, which take advantage of the RCC lift [[construction]] methods, resulting in offsets on the downstream dam face, creating the spillway steps. These steps can be formed or unformed RCC or capped with conventional concrete. A chute-type crest (flat), along with straight or curved ogee crests, are typically used in combination with stepped chutes. Other applications have involved incorporating both smooth flow surfaces and steps into a reinforced concrete spillway chute and RCC [[Overtopping Protection\|overtopping protection]] for an earth dam. A consideration for a stepped spillway involves the potential kinetic energy dissipation via the steps, which can reduce the size and type of the terminal structure. However, the kinetic energy dissipation potential may be reduced as flow depth (relative to the step size) increases (due to skimming flows). Also, consideration should be given to evaluating the [[cavitation]] potential. Examples of stepped spillways include the service spillway at Maricopa Water District’s Camp Dyer Diversion Dam (concrete), the auxiliary spillway (Joint Federal Project) at Reclamation’s Folsom Dam (composite), and the service spillway at Reclamation’s Upper Stillwater Dam (concrete). <ref name="DS14" />

	==Various Shaped Weirs==		==Various Shaped Weirs==

	This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to sharp-crested weirs to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and embankment dams and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />		This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to sharp-crested weirs to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and [[Embankment Dams\|embankment dams]] and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />

	~~==Examples==~~
	~~{{Website Icon}}~~
	==Best Practices Resources==		==Best Practices Resources==
	{{Document Icon}} [[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations)\|Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) (Bureau of Reclamation]]		{{Document Icon}} [[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations)\|Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) (Bureau of Reclamation]]
	~~==Trainings==~~
	~~{{Video Icon}}~~

	<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->		<!-- For information on notation for in text citations visit https://www.mediawiki.org/wiki/Help:Cite Or simply enclose the citation as shown <ref> citation </ref> in the location of the in text mention. Citations will automatically populate below-->

Grichards at 06:47, 18 November 2022

2022-11-18T06:47:44Z

← Older revision		Revision as of 06:47, 18 November 2022
Line 1:		Line 1:
	__NOTOC__		__NOTOC__
			[[Category:Uncontrolled Spillways]]
	----		----
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	Chute (open channel or trough) spillways include baffled apron, grade control sill, stepped chute, and various shaped weirs:<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2014]]</ref>		Chute (open channel or trough) [[spillways]] include baffled apron, grade control sill, stepped chute, and various shaped weirs:<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2014]]</ref>

	==Baffled Apron Spillway==		==Baffled Apron Spillway==
Line 10:		Line 11:
	==Grade Control Sill Spillway==		==Grade Control Sill Spillway==

	This type of control structure is primarily suited for auxiliary and emergency spillways; however, in some cases, it can function as a service spillway. A grade control sill is a less robust, minimal spillway typically limited to a vertical reinforced concrete wall (sill) that is placed in a trench through an excavated trapezoidal channel. The grade control sill can be constructed in both rock and soil foundations. The grade control sill spillway tends to have limited reserve discharge capacity, given channel armorment could be damaged or fail due to discharges that exceed design levels. Therefore, an important consideration is to limit potential erosion during spillway operation. In summary, this type of spillway should only be used on low head situations where the hydraulic drop (vertical dimension between the reservoir water surface and the downstream river or stream) can be effectively controlled, including limiting erosion potential. Examples of grade control sill spillways include the service spillway at Reclamation’s Crane Prairie Dam (embankment) and the emergency spillway at Reclamation’s Davis Creek Dam (embankment).<ref name="DS14" />		This type of control structure is primarily suited for auxiliary and emergency spillways; however, in some cases, it can function as a service spillway. A grade control sill is a less robust, minimal spillway typically limited to a vertical reinforced concrete wall (sill) that is placed in a trench through an excavated trapezoidal channel. The grade control sill can be constructed in both rock and soil foundations. The grade control sill spillway tends to have limited reserve discharge capacity, given channel armorment could be damaged or fail due to discharges that exceed design levels. Therefore, an important consideration is to limit potential erosion during spillway [[operation]]. In summary, this type of spillway should only be used on low head situations where the hydraulic drop (vertical dimension between the reservoir water surface and the downstream river or stream) can be effectively controlled, including limiting erosion potential. Examples of grade control sill spillways include the service spillway at Reclamation’s Crane Prairie Dam (embankment) and the emergency spillway at Reclamation’s Davis Creek Dam (embankment).<ref name="DS14" />

	==Stepped Chute Spillway==		==Stepped Chute Spillway==

	This type of structure is suited for service and auxiliary spillways. Stepped spillways refer to the stepped chute portion of the spillway and have primarily been used with RCC dams, which take advantage of the RCC lift construction methods, resulting in offsets on the downstream dam face, creating the spillway steps. These steps can be formed or unformed RCC or capped with conventional concrete. A chute-type crest (flat), along with straight or curved ogee crests, are typically used in combination with stepped chutes. Other applications have involved incorporating both smooth flow surfaces and steps into a reinforced concrete spillway chute and RCC overtopping protection for an earth dam. A consideration for a stepped spillway involves the potential kinetic energy dissipation via the steps, which can reduce the size and type of the terminal structure. However, the kinetic energy dissipation potential may be reduced as flow depth (relative to the step size) increases (due to skimming flows). Also, consideration should be given to evaluating the cavitation potential. Examples of stepped spillways include the service spillway at Maricopa Water District’s Camp Dyer Diversion Dam (concrete), the auxiliary spillway (Joint Federal Project) at Reclamation’s Folsom Dam (composite), and the service spillway at Reclamation’s Upper Stillwater Dam (concrete). <ref name="DS14" />		This type of structure is suited for service and auxiliary spillways. Stepped spillways refer to the stepped chute portion of the spillway and have primarily been used with RCC dams, which take advantage of the RCC lift [[construction]] methods, resulting in offsets on the downstream dam face, creating the spillway steps. These steps can be formed or unformed RCC or capped with conventional concrete. A chute-type crest (flat), along with straight or curved ogee crests, are typically used in combination with stepped chutes. Other applications have involved incorporating both smooth flow surfaces and steps into a reinforced concrete spillway chute and RCC overtopping protection for an earth dam. A consideration for a stepped spillway involves the potential kinetic energy dissipation via the steps, which can reduce the size and type of the terminal structure. However, the kinetic energy dissipation potential may be reduced as flow depth (relative to the step size) increases (due to skimming flows). Also, consideration should be given to evaluating the [[cavitation]] potential. Examples of stepped spillways include the service spillway at Maricopa Water District’s Camp Dyer Diversion Dam (concrete), the auxiliary spillway (Joint Federal Project) at Reclamation’s Folsom Dam (composite), and the service spillway at Reclamation’s Upper Stillwater Dam (concrete). <ref name="DS14" />

	==Various Shaped Weirs==		==Various Shaped Weirs==

Rmanwaring at 22:53, 30 September 2022

2022-09-30T22:53:43Z

← Older revision		Revision as of 22:53, 30 September 2022
Line 2:		Line 2:
	----		----
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	~~'''"~~Chute (open channel or trough) spillways ~~-'''~~ include baffled apron, grade control sill, stepped chute, and various shaped weirs:<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2014]]</ref>		Chute (open channel or trough) spillways include baffled apron, grade control sill, stepped chute, and various shaped weirs:<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2014]]</ref>
	*"''Baffled ~~apron spillway -''~~ This type of structure is suited for service, auxiliary, and emergency spillways. Baffled apron spillways provide crest control, conveyance, and energy dissipation in one structure. Primary considerations are associated with low to moderate hydraulic heads to ensure the baffles function properly and crest lengths are limited (i.e., significant cost increases as crest length increases). Additionally, this spillway may be practical in areas where there is limited space for a terminal structure such as a hydraulic jump stilling basin. Also, effectiveness (energy dissipation and discharge capacity) of baffled apron spillways can be adversely impacted by debris. An example of a baffled apron spillway is the service spillway at Reclamation’s Conconully Dam (embankment).<ref name="DS14" />
	*''"Grade ~~control sill spillway -''~~ This type of control structure is primarily suited for auxiliary and emergency spillways; however, in some cases, it can function as a service spillway. A grade control sill is a less robust, minimal spillway typically limited to a vertical reinforced concrete wall (sill) that is placed in a trench through an excavated trapezoidal channel. The grade control sill can be constructed in both rock and soil foundations. The grade control sill spillway tends to have limited reserve discharge capacity, given channel armorment could be damaged or fail due to discharges that exceed design levels. Therefore, an important consideration is to limit potential erosion during spillway operation. In summary, this type of spillway should only be used on low head situations where the hydraulic drop (vertical dimension between the reservoir water surface and the downstream river or stream) can be effectively controlled, including limiting erosion potential. Examples of grade control sill spillways include the service spillway at Reclamation’s Crane Prairie Dam (embankment) and the emergency spillway at Reclamation’s Davis Creek Dam (embankment).<ref name="DS14" />		==Baffled Apron Spillway==
	*''"Stepped ~~chute spillway -''~~ This type of structure is suited for service and auxiliary spillways. Stepped spillways refer to the stepped chute portion of the spillway and have primarily been used with RCC dams, which take advantage of the RCC lift construction methods, resulting in offsets on the downstream dam face, creating the spillway steps. These steps can be formed or unformed RCC or capped with conventional concrete. A chute-type crest (flat), along with straight or curved ogee crests, are typically used in combination with stepped chutes. Other applications have involved incorporating both smooth flow surfaces and steps into a reinforced concrete spillway chute and RCC overtopping protection for an earth dam. A consideration for a stepped spillway involves the potential kinetic energy dissipation via the steps, which can reduce the size and type of the terminal structure. However, the kinetic energy dissipation potential may be reduced as flow depth (relative to the step size) increases (due to skimming flows). Also, consideration should be given to evaluating the cavitation potential. Examples of stepped spillways include the service spillway at Maricopa Water District’s Camp Dyer Diversion Dam (concrete), the auxiliary spillway (Joint Federal Project) at Reclamation’s Folsom Dam (composite), and the service spillway at Reclamation’s Upper Stillwater Dam (concrete). <ref name="DS14" />
	*''"Various ~~shaped weirs -''~~ This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to sharp-crested weirs to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and embankment dams and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />		This type of structure is suited for service, auxiliary, and emergency spillways. Baffled apron spillways provide crest control, conveyance, and energy dissipation in one structure. Primary considerations are associated with low to moderate hydraulic heads to ensure the baffles function properly and crest lengths are limited (i.e., significant cost increases as crest length increases). Additionally, this spillway may be practical in areas where there is limited space for a terminal structure such as a hydraulic jump stilling basin. Also, effectiveness (energy dissipation and discharge capacity) of baffled apron spillways can be adversely impacted by debris. An example of a baffled apron spillway is the service spillway at Reclamation’s Conconully Dam (embankment).<ref name="DS14" />

			==Grade Control Sill Spillway==

			This type of control structure is primarily suited for auxiliary and emergency spillways; however, in some cases, it can function as a service spillway. A grade control sill is a less robust, minimal spillway typically limited to a vertical reinforced concrete wall (sill) that is placed in a trench through an excavated trapezoidal channel. The grade control sill can be constructed in both rock and soil foundations. The grade control sill spillway tends to have limited reserve discharge capacity, given channel armorment could be damaged or fail due to discharges that exceed design levels. Therefore, an important consideration is to limit potential erosion during spillway operation. In summary, this type of spillway should only be used on low head situations where the hydraulic drop (vertical dimension between the reservoir water surface and the downstream river or stream) can be effectively controlled, including limiting erosion potential. Examples of grade control sill spillways include the service spillway at Reclamation’s Crane Prairie Dam (embankment) and the emergency spillway at Reclamation’s Davis Creek Dam (embankment).<ref name="DS14" />

			==Stepped Chute Spillway==

			This type of structure is suited for service and auxiliary spillways. Stepped spillways refer to the stepped chute portion of the spillway and have primarily been used with RCC dams, which take advantage of the RCC lift construction methods, resulting in offsets on the downstream dam face, creating the spillway steps. These steps can be formed or unformed RCC or capped with conventional concrete. A chute-type crest (flat), along with straight or curved ogee crests, are typically used in combination with stepped chutes. Other applications have involved incorporating both smooth flow surfaces and steps into a reinforced concrete spillway chute and RCC overtopping protection for an earth dam. A consideration for a stepped spillway involves the potential kinetic energy dissipation via the steps, which can reduce the size and type of the terminal structure. However, the kinetic energy dissipation potential may be reduced as flow depth (relative to the step size) increases (due to skimming flows). Also, consideration should be given to evaluating the cavitation potential. Examples of stepped spillways include the service spillway at Maricopa Water District’s Camp Dyer Diversion Dam (concrete), the auxiliary spillway (Joint Federal Project) at Reclamation’s Folsom Dam (composite), and the service spillway at Reclamation’s Upper Stillwater Dam (concrete). <ref name="DS14" />

			==Various Shaped Weirs==

			This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to sharp-crested weirs to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and embankment dams and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />

	==Examples==		==Examples==

Rmanwaring at 22:51, 30 September 2022

2022-09-30T22:51:03Z

← Older revision		Revision as of 22:51, 30 September 2022
Line 2:		Line 2:
	----		----
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	[~~Paragraph here~~]		'''"Chute (open channel or trough) spillways -''' include baffled apron, grade control sill, stepped chute, and various shaped weirs:<ref name="DS14">[[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) \| Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations), USBR, 2014]]</ref>
			*"''Baffled apron spillway -'' This type of structure is suited for service, auxiliary, and emergency spillways. Baffled apron spillways provide crest control, conveyance, and energy dissipation in one structure. Primary considerations are associated with low to moderate hydraulic heads to ensure the baffles function properly and crest lengths are limited (i.e., significant cost increases as crest length increases). Additionally, this spillway may be practical in areas where there is limited space for a terminal structure such as a hydraulic jump stilling basin. Also, effectiveness (energy dissipation and discharge capacity) of baffled apron spillways can be adversely impacted by debris. An example of a baffled apron spillway is the service spillway at Reclamation’s Conconully Dam (embankment).<ref name="DS14" />
	==Other ~~Headings~~==		*''"Grade control sill spillway -'' This type of control structure is primarily suited for auxiliary and emergency spillways; however, in some cases, it can function as a service spillway. A grade control sill is a less robust, minimal spillway typically limited to a vertical reinforced concrete wall (sill) that is placed in a trench through an excavated trapezoidal channel. The grade control sill can be constructed in both rock and soil foundations. The grade control sill spillway tends to have limited reserve discharge capacity, given channel armorment could be damaged or fail due to discharges that exceed design levels. Therefore, an important consideration is to limit potential erosion during spillway operation. In summary, this type of spillway should only be used on low head situations where the hydraulic drop (vertical dimension between the reservoir water surface and the downstream river or stream) can be effectively controlled, including limiting erosion potential. Examples of grade control sill spillways include the service spillway at Reclamation’s Crane Prairie Dam (embankment) and the emergency spillway at Reclamation’s Davis Creek Dam (embankment).<ref name="DS14" />
	~~[Paragraph here]~~		*''"Stepped chute spillway -'' This type of structure is suited for service and auxiliary spillways. Stepped spillways refer to the stepped chute portion of the spillway and have primarily been used with RCC dams, which take advantage of the RCC lift construction methods, resulting in offsets on the downstream dam face, creating the spillway steps. These steps can be formed or unformed RCC or capped with conventional concrete. A chute-type crest (flat), along with straight or curved ogee crests, are typically used in combination with stepped chutes. Other applications have involved incorporating both smooth flow surfaces and steps into a reinforced concrete spillway chute and RCC overtopping protection for an earth dam. A consideration for a stepped spillway involves the potential kinetic energy dissipation via the steps, which can reduce the size and type of the terminal structure. However, the kinetic energy dissipation potential may be reduced as flow depth (relative to the step size) increases (due to skimming flows). Also, consideration should be given to evaluating the cavitation potential. Examples of stepped spillways include the service spillway at Maricopa Water District’s Camp Dyer Diversion Dam (concrete), the auxiliary spillway (Joint Federal Project) at Reclamation’s Folsom Dam (composite), and the service spillway at Reclamation’s Upper Stillwater Dam (concrete). <ref name="DS14" />
			*''"Various shaped weirs -'' This type of structure is suitable for service, auxiliary, and emergency spillways. The hydraulic control is established by various shaped weirs ranging from broad-crested to sharp-crested weirs to no weir (flat bottom or sloping channel). Various shaped weir control structures are not as efficient as an ogee crest control structure, but they still tend to have sizable reserve discharge capacity (i.e., increased discharge due to elevated reservoir water surface). Also, various shaped weir control structures are relatively free of operation and maintenance issues. This type of spillway is applicable to both concrete and embankment dams and can be gated or ungated. Examples of various shaped weir spillways include the auxiliary spillway at Reclamation’s Deerfield Dam (embankment) and the service spillway at Reclamation’s Lost Lake Dam (embankment).<ref name="DS14" />

	==Examples==		==Examples==
	{{Website Icon}}		{{Website Icon}}
	==Best Practices Resources==		==Best Practices Resources==
	{{Document Icon}}		{{Document Icon}} [[Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations)\|Design Standards No. 14: Appurtenant Structures for Dams (Ch. 3: General Spillway Design Considerations) (Bureau of Reclamation]]
	==Trainings==		==Trainings==
	{{Video Icon}}		{{Video Icon}}

Rmanwaring: Created page with "NOTOC ---- [Paragraph here] ==Other Headings== [Paragraph here] ==Examples== {{Website Icon}} ==Best Practices Resources== {{Document Icon}} ==Trainings== {{Video Icon}}

Chute Spillways - Revision history

Grichards at 23:43, 16 March 2023

Grichards at 23:42, 16 March 2023

Rmanwaring at 00:03, 14 December 2022

Rmanwaring: /* Best Practices Resources */

Grichards at 22:58, 2 December 2022

Grichards at 06:47, 18 November 2022

Rmanwaring at 22:53, 30 September 2022

Rmanwaring at 22:51, 30 September 2022

Rmanwaring: Created page with "__NOTOC__ ---- [Paragraph here] ==Other Headings== [Paragraph here] ==Examples== {{Website Icon}} ==Best Practices Resources== {{Document Icon}} ==Trainings== {{Video Icon}}

Rmanwaring: Created page with "NOTOC ---- [Paragraph here] ==Other Headings== [Paragraph here] ==Examples== {{Website Icon}} ==Best Practices Resources== {{Document Icon}} ==Trainings== {{Video Icon}}